Comment faire correctement une pédicure matérielle à la maison - instructions étape par étape. Pédicure matérielle
1. Pour prévenir toute infection, nous appliquons un désinfectant à large spectre sur les mains du technicien et les pieds du client.
2. Pour adoucir la peau kératinisée, appliquez un produit spécial sur la peau du pied pendant 10 minutes.
3. Pendant que les couches kératinisées de la peau s'adoucissent, on traite la zone cuticules et la peau autour de l'ongle avec des attaches spéciales ( voir ci-dessous).
4. Nous effectuons la modélisation et le polissage de la forme des ongles plaque à ongles (voir ci-dessous ). Pour corriger significativement la longueur de l’ongle, on peut utiliser un coupe-ongles.
5. Utilisez une serviette pour retirer tout assouplissant restant.
6. Nous retirons la couche kératinisée de la peau, les cors et les callosités des pieds et des doigts à l'aide de l'appareil utilisant divers accessoires ( voir ci-dessous). Il n’existe pas de procédure uniforme pour effectuer une pédicure matérielle. Vous pouvez commencer la procédure à la fois par le pied et par les orteils. Vous pouvez traiter les deux jambes en même temps ou une à la fois.
7. Nous appliquons un revêtement décoratif ou médicinal sur les ongles.
8. Appliquer sur les ongles huile adoucissante.
La peau des pieds doit être traitée avec l'appareil en déplaçant constamment la poignée de l'appareil, sans jamais s'arrêter au même endroit ni appuyer, sinon le client ressentira une sensation de brûlure. Les buses sont utilisées, en commençant par celles à gros grains, en passant progressivement aux buses à grains fins et aux polisseuses. Pour traitement des pieds, dans la pédicure matérielle, on utilise des buses en carbure (pour les vieux cors durcis) et des buses en sable (uniques) d'abrasivité variable.
Les prix des accessoires dépendent de leur durabilité. Plus la buse est chère, plus elle peut être utilisée longtemps et les buses bon marché s'usent rapidement. Cependant, selon certains artisans, les buses jetables (à sable) bon marché fabriquées en Chine ne sont pratiquement pas inférieures aux buses européennes coûteuses.
Traitement des doigts en pédicure matérielle.
Traitement de la plaque à ongles.
Fraise cylindrique spéciale pour Bord libre . Afin d'éviter d'endommager les tissus voisins, cette attache est recouverte de saphir exclusivement à son extrémité. |
||
|
Taille-diamant, tronc de cône. Buse multifonctionnelle. Une demande est en cours de traitement bord libre de l'ongle. | |
|
Fraise cylindrique avec dentelures perforées longitudinales en acier inoxydable. Résout parfaitement le problème de la gryphose. Peut être utilisé pour traiter le bord libre. | |
|
Brosse (brosse) pour nettoyer le bord libre. | |
Traitement des cuticules. |
||
|
Fraise diamantée sphérique. Pratique et sûr à utiliser. | |
|
Coupeur uniquement propre - un couteau spécial en acier à outils avec une surface de travail polygonale pour éliminer le ptegirium. Elle peut travailler comme si elle était sèche. plaque de l'ongle , et après avoir appliqué le dissolvant cuticules | |
|
Coupe-corindon pour polir les cuticules. Selon son abrasivité, il est utilisé aussi bien au niveau des cuticules que pour meuler la peau de l'espace périunguéal. | |
|
Brosse (brosse) pour polir la cuticule après traitement avec la buse only-clean. Appliquez un dissolvant pour cuticules avant utilisation. | |
Traitement des plis des ongles. |
||
|
Coupe-aiguille en carbure avec coupe croisée fine- une bonne aide dans la lutte contre rouleaux durs. Ce cutter convient pour réaliser des coupes lors du traitement d'un ongle incarné. |
|
|
Fraise diamantée à cône tronqué avec une extrémité arrondie d'abrasivité variable. Le choix de l’abrasivité du cutter dépend de l’état de la peau. Plus la peau est rugueuse, plus l'abrasif sur sa partie active est gros. La photo montre un abrasif moyen. | |
Taille-saphir en forme de poire. Agit délicatement sur la peau, y compris la zone des cuticules. L'abrasif de la tête en saphir est moyen ou fin. | ||
Traitement des callosités des orteils. |
||
|
Tailleur de diamant MonAlit - tornade. Cette fraise est fabriquée à l'aide d'une technologie unique, formant une structure monolithique composée presque entièrement de grains de diamant. Ce cutter broie doucement la peau sans la blesser, formant une surface idéale et lisse, tandis que la peau NE CHAUFFE PAS ! Cet accessoire est indispensable lorsque l'on travaille avec des pieds diabétiques. | |
|
Fraise en acier, tronconique, perforée. Ce cutter, malgré son apparence menaçante, peut être utilisé en toute sécurité pour accélérer le travail. | |
|
Pour travailler avec des callosités centrales, vous devez avoir fraises de différents diamètres(de 1mm à 3mm). Lors du forage du canal calleux, nous changeons les fraises, en commençant par une plus grosse, en passant progressivement à une fraise de petit diamètre. | Le pied est traité avec une buse à base de caoutchouc et des capuchons remplaçables de différents diamètres. Le degré d’abrasivité des capuchons dépend de l’état des pieds. La photo montre un socle d'un diamètre de 13 mm avec un capuchon abrasif 080 (gros abrasif). Options possibles pour l'abrasivité des capuchons : 060 - super grand, 080 - grand, 150 - moyenne, 240 ou 320 - petit. |
|
Buse à base de caoutchouc d'un diamètre de 5 mm avec un capuchon de 080 abrasivité grossière. | |
|
Buse très pratique pour pédicure ! Base d'un diamètre de 11 mm avec capuchons interchangeables : 060-super-large, 080-large, 150-moyen, 280-petit. La surface traitée en un seul passage est supérieure à celle d'une base d'un diamètre de 13 mm. | |
Fraise en carbure avec dents transversales grossières, moyennes et fines. | ||
|
Fraise en carbure avec très grand(anneau bleu), grand(anneau vert), ou petit(anneau rouge) croix Ô th en coupant des dents recouvertes de nitrure de titane. Plus la coupe est fine, plus la surface traitée devient lisse. | |
|
Fraise en acier avec encoches perforées longitudinales. Utilisé lorsque l'on travaille avec l'hyperkératose. | |
|
Fraise en carbure, tronc-cône à extrémité arrondie et coupe transversale grossière. Combat efficacement les callosités. Bague noire- dents extra-larges à coupe transversale. |
|
|
Fraise en carbure avec coupe spéciale en spirale. Les fonctions de coupe sont conçues pour un travail efficace sur les jambes et la peau. | |
|
Fraise en carbure en forme de poire. Aide à éliminer la desquamation. Recommandé pour les pieds diabétiques. Cette buse peut être utilisée dans deux directions : a) soulever la peau squameuse dans une direction, b) en changeant de direction, coupez doucement. |
|
|
Taille-diamant MonAlit (diamant fritté) - tornado broie doucement la peau sans la chauffer. Idéal pour travailler les pieds diabétiques et traiter les zones interdigitales. | |
|
Meuleuse en carbure de silicone en forme de balle pour créer une surface parfaitement lisse. La couleur de la buse dépend de l'abrasivité du grain. | |
Enlever les cors. |
||
Ce cutter est recommandé uniquement aux artisans expérimentés ! Un couteau creux avec un bord tranchant est conçu pour détacher les cors. Pour ce faire, un « cran » est réalisé. |
||
|
La fraise réversible en carbure avec coupe transversale élimine facilement les callosités lâches. | |
|
Le couteau en acier inoxydable élimine également facilement les callosités lâches. | |
Enlèvement des callosités centrales. |
||
|
La buse en carbure élimine la couche kératinisée des cors, ouvrant ainsi l'accès au cœur du cal. | |
|
Un couteau creux traite le noyau du cal. | |
|
À l'aide d'une fraise sphérique perforée, nous forons le cal. | |
|
À l'aide d'une fraise diamantée en forme de bourgeon, nous broyons les bords des callosités.
Grain de coupe diamant : grand- anneau vert, moyenne- anneau bleu. |
|
Traitement des fissures du pied. |
||
|
Nous utilisons une fraise cylindrique avec des encoches perforées longitudinales pour travailler avec l'hyperkératose. | |
|
Une buse en caoutchouc avec des capuchons remplaçables est parfaite pour préparer le pied lors du traitement des fissures. Le degré d'abrasivité dépend de l'état des callosités. La photo montre un gros abrasif, taille de base 13 mm. | |
|
La buse avec une base en caoutchouc de 11 mm et des capuchons remplaçables élimine efficacement la couche cornée pour accéder aux fissures. Sur l'image 150 - abrasif moyen. |
|
|
Buse à base en caoutchouc d'un diamètre de 5 mm avec capuchons remplaçables. Plus la peau est fine, moins elle doit être abrasive. | |
|
A l'aide d'une fraise diamantée tronconique, nous commençons à travailler directement sur les fissures. Dans notre travail, nous utilisons les bords supérieur et inférieur de la buse. | |
|
Coupe-fissures à l'aiguille Fabriqué en acier inoxydable, multifonctionnel. Dans ce cas, nous l'utilisons lors du traitement des bords d'une fissure sur le talon. | |
|
Le coupe-boutons diamanté est parfait pour traiter les fissures de manière sûre et efficace. Ce cutter est particulièrement adapté aux artisans débutants. | |
|
U coupe-bourgeons en diamant Avec une coupe transversale, vous pouvez utiliser tous les plans dans votre travail. | |
|
À l'aide d'un cutter cylindrique, nous meulons les bords de la fissure. | |
|
Une fraise diamantée frittée est efficace et pratique pour meuler les bords des fissures. | |
|
Une fraise en carbure avec une coupe en forme de croix moyenne ponce bien la peau à grande vitesse (environ 20 000 tr/min). | |
|
Une option alternative pour le meulage est une fraise diamantée avec une extrémité arrondie. Nous sélectionnons la granulométrie du cutter en fonction de l'état de la peau. | |
|
Le meulage et le polissage final sont effectués à l'aide de buses en alliage de carbure de silicone ou en silicone sans abrasif. | |
|
Buse en silicone pour polir la peau et les ongles. |
Chaque saison ravit les femmes avec des nouveautés dans leur garde-robe, un merveilleux retour de l'ancienne mode ou des inventions qui leur permettent d'être encore plus belles. La pédicure matérielle ne fait pas exception. Les femmes qui tentent cette procédure sont divisées en deux camps : certaines sont folles de cette procédure, d'autres la détestent tout simplement. L'effet résultant dépend peut-être des mains habiles et de l'expérience du maître. Pour changer à jamais votre vision de cette procédure, nous vous proposons de la faire à la maison. Nous vous dirons comment faire une pédicure matérielle pour que la procédure vous fasse plaisir.
Si vous avez beaucoup entendu parler de cette procédure, mais que vous ne comprenez toujours pas clairement quelle est son essence, nous sommes heureux de vous la présenter.
Vous serez sûrement heureux de savoir que le berceau de la pédicure matérielle est l'Allemagne. Les Allemands sont un peuple tellement pédant et pointilleux en matière de qualité qu’ils ont pris soin de garantir que les jambes des femmes acquièrent beauté et santé sans les douleurs inutiles qu’elles doivent souvent endurer.
La pédicure matérielle est absolument sûre et hygiénique. Cela ne blesse pas la peau. Après avoir essayé la procédure une fois, vous changerez à jamais les stéréotypes sur la pédicure, car cela peut être différent.
Lors de l'exécution de la procédure dans le salon, les éléments suivants vous seront proposés. Dès le début, les pieds seront traités avec une solution spéciale. Il n’y aura pas de bains de vapeur pour la peau ! Ensuite, les pieds seront traités avec de la crème et les orteils avec du liquide pour ongles durs. L’action de ces médicaments s’adresse aux parties non vivantes de la peau, ce qui signifie que les cellules saines ne seront pas endommagées !
Ensuite, l'appareil est connecté au travail, dont les accessoires de meulage traiteront les ongles. La cuticule n'est pas enlevée, mais légèrement taillée, la forme de l'ongle est ajustée selon vos souhaits et l'intervention se termine par l'application d'une crème hydratante.
Quels sont les avantages de la pédicure matérielle ?
La pédicure matérielle est une procédure utile d'un point de vue médical. Des accessoires de coupe spéciaux permettent d'éliminer efficacement les maladies fongiques et autres de la peau et des ongles, et la procédure elle-même sert de mesure préventive de protection contre leur récidive. Quelles maladies pouvez-vous oublier avec une procédure de pédicure matérielle ? Parlons d'eux.
- Mycoses, onychomycose. Ces maladies fongiques surviennent chez un habitant sur cinq sur Terre. Les signes de ce type de champignon sont une déformation des plaques à ongles, des changements par rapport à la couleur naturelle, une desquamation, des démangeaisons et une sécheresse de la peau, des microfissures. Le seul traitement des mycoses et des onychomycoses est l'ablation de la plaque à ongles, qui s'effectue sans douleur lors d'une procédure de pédicure matérielle.
- Hyperkératose. Cette maladie se caractérise par l'apparition d'une couche cornée dure de la peau, qui apparaît à la suite d'une pression excessive sur certaines parties des pieds, par exemple lors du port de chaussures serrées et inconfortables.
- Fissures aux pieds. En règle générale, des fissures se forment en raison de changements internes dans le corps et d'une perturbation des fonctions des organes internes. À l'aide d'une procédure de pédicure matérielle, les fissures sont soumises à un traitement de haute qualité, ce qui contribue à leur guérison rapide.
- Callosités centrales. Ces callosités sont de forme ronde et apparaissent le plus souvent entre le 3ème et le 4ème orteil et sur la plante des pieds. Ces callosités sont d'origine mécanique ou virale. Il faut de 3 à 6 procédures de pédicure matérielle pour lisser complètement la peau.
- Verrues plantaires. Ces formations infectieuses virales apparaissent sur la peau des pieds. Vous en avez sûrement entendu parler sous le nom de « papillomavirus humain », qui compte plus d’une centaine de variétés.
- Hyperhidrose. Ce mot fait référence à une transpiration accrue, qui nécessite une intervention médicale.
- Épaississement des plaques à ongles. L'épaisseur d'une plaque à ongles normale sur le pied est de 1 mm. L'épaississement peut être causé par l'eczéma ou le psoriasis, ainsi que par d'autres facteurs. Auparavant, il était possible de se débarrasser de ce problème grâce à la chirurgie, mais avec l'avènement de la pédicure matérielle, se débarrasser de ce problème est devenu beaucoup plus facile et plus sûr.
- Ongles incarnés. En utilisant la méthode dont nous discutons, ce problème peut être résolu en une seule procédure.
Afin que vous ayez la possibilité d'imaginer une image plus claire de la procédure de pédicure matérielle, nous jugeons utile de montrer ses avantages et ses inconvénients.
Les avantages de la pédicure matérielle sont :
- Sécurité et hygiène absolues. La qualité allemande satisfait pleinement à toutes les exigences nécessaires. De plus, les accessoires sont si bien pensés qu'ils permettent de travailler même dans des endroits difficiles d'accès, comme entre les doigts ou au bout de ceux-ci. Il est beaucoup plus difficile d’obtenir le même résultat avec une pédicure traditionnelle.
- Aucune douleur. Vous rirez peut-être des chatouilles, mais vous ne ressentirez certainement aucune douleur.
- Le risque d’infection est réduit à zéro.
- Élimination efficace des ongles incarnés, des callosités, des cors et des plaques à ongles épaissies.
Inconvénients de la pédicure matérielle :
- Coût élevé de la procédure. Quoi qu'on en dise, vous devrez dépenser de l'argent en désinfectants, stérilisants et autres produits.
- Manque de professionnalisme. Si vous effectuez la procédure vous-même, un manque de professionnalisme vous obligera à répéter la procédure bientôt.
- Si l'état de la peau de vos pieds est trop rugueux, vous n'obtiendrez pas l'effet du premier coup. Vous devrez effectuer la procédure encore 5 à 7 fois. Cependant, vous pouvez accélérer le processus en effectuant des bains de pieds à la vapeur après une procédure de pédicure matérielle.
Pédicure hardware : quelles sont les contre-indications ?
Comme toute autre procédure, la pédicure matérielle ne doit pas être réalisée dans un certain nombre de cas :
- Pendant la grossesse, puisque divers produits chimiques aident à adoucir la peau
- Pour les maladies du foie et des reins (dues à l'intervention d'agents chimiques)
- En cas de réactions allergiques prononcées (dans ce cas, vous devez consulter un médecin).
Comment réaliser une procédure de pédicure matérielle à la maison ?
Maintenant que vous savez presque tout sur la procédure et que vous êtes déjà en mesure de prendre la bonne décision concernant ce type de pédicure, nous vous dirons quoi et comment faire pour obtenir un effet décent.
Pour la procédure de pédicure matérielle, vous aurez besoin de :
- appareil de pédicure avec accessoires appropriés
- désinfectant
- adoucissant spécial pour les cuticules et la peau des pieds
- bâton de cuticule orange
- teinture pour guérir les callosités
- pommade pour pieds gercés aux huiles essentielles
- masque pour les pieds à la paraffine
- dissolvant pour vernis à ongles ou dissolvant pour vernis à ongles
Vous ne devez commencer la procédure qu'après avoir soigneusement étudié les instructions de l'appareil de pédicure. Nous ne savons pas quelle unité vous achèterez et nous allons donc décrire actions à réaliser, en grandes lignes.
- Débarrassez les plaques à ongles de la couche de vernis restante. Lavez-vous ensuite les pieds (mais jamais à la vapeur). Essuyez vos pieds et vos orteils avec une serviette sèche.
- Traitez vos pieds avec un désinfectant pré-préparé. Cette étape servira de garantie contre les infections.
- Enduisez vos cuticules et vos pieds d’un adoucissant pour aider à éliminer les cellules mortes de la peau.
- Traitez la peau des pieds et des doigts là où se trouvent les cellules mortes. Traitez la peau autour des ongles avec un patin de ponçage spécial.
- En prenant la plus petite buse, ajustez légèrement la cuticule pour la rendre uniforme. Pour plus de commodité, vous pouvez le soulever avec un bâton orange en bois.
- Façonnez et allongez vos ongles à l'aide d'une fraise abrasive moyenne ou fine. Nettoyez la surface des plaques à ongles avec une brosse spéciale.
- À l'aide d'un embout en caoutchouc, poncez la surface de vos ongles.
- Prenez soin des callosités et des cors, pour lesquels une petite fraise spéciale fera l'affaire. Après avoir percé un petit trou avec une fraise, lubrifiez-le avec une teinture cicatrisante pour les callosités, qui dissoudra la racine des callosités.
- Passez au travail sur les talons fissurés. Pour ce faire, éliminez les cellules rugueuses de la peau et appliquez-y une pommade contenant de la lanoline et des huiles essentielles avec des mouvements de massage doux.
- Pour rendre la procédure encore plus agréable, appliquez une épaisse couche de masque à la paraffine sur vos ongles. Enveloppez la surface de vos pieds avec une pellicule plastique. Portez des chaussettes en laine. Après 15 à 20 minutes, retirez les chaussettes et le plastique.
- À l'aide de dissolvant pour vernis à ongles, dégraissez les plaques à ongles et recouvrez-les de base, de 2-3 couches de vernis et d'un fixateur.
Nous espérons que la procédure de pédicure matérielle ne vous posera aucune difficulté et vous procurera des moments agréables. Et si vous avez déjà subi l'intervention en salon et que vous l'avez apprécié, nous vous recommandons d'acheter rapidement un appareil de pédicure et de prendre soin de vous à la maison.
Effectuer soi-même une pédicure matérielle à la maison est pratique pour diverses raisons. L'achat d'une machine spéciale pour le soin des pieds résout de nombreux problèmes liés à l'entretien et à la création d'une pédicure à la maison. Mais afin de traiter correctement vos pieds et vos ongles, vous devez étudier attentivement les recommandations des spécialistes à cet égard. Dans cet article, vous trouverez les informations et la vidéo les plus complètes sur la façon de prendre soin de vos pieds en utilisant l'appareil à la maison.
Pour déterminer les avantages de la pédicure matérielle pour les débutants, vous devez comprendre en quoi elle diffère des autres types de soins des pieds. Examinons les principaux types de soins des pieds.
Pédicure classique
Avec ce traitement, les pieds sont trempés dans l'eau, les cellules mortes de la peau sont effacées avec une pierre ponce, les cuticules sont coupées avec des ciseaux et des pinces, les ongles sont limés et vernis.
Pédicure européenne
Les pieds n’ont pas besoin d’être adoucis avec de l’eau et il n’est pas nécessaire d’utiliser des ciseaux. C'est là que les produits spéciaux pour éliminer les cors sont utiles.
Pédicure sèche
Cette option consiste à traiter la peau des pieds « sèche ». Toutes les excroissances inutiles sont coupées sans trempage ni ramollissement avec des limes à ongles.
Pédicure matérielle
Si les types habituels de pédicure nécessitent l'utilisation de bains de pieds et de limes, alors pour l'entretien du matériel, vous n'avez besoin que d'un bon appareil. Le pied et les ongles sont traités à l'aide d'accessoires de coupe. Ils sont disponibles sous différentes formes pour permettre de nettoyer toutes les zones à problèmes de la peau.
Afin de réaliser correctement la procédure vous-même, nous essaierons de tout vous dire avec des explications détaillées.
Qu'est-ce qu'une pédicure matérielle
Le traitement de la peau des pieds et des ongles avec l'appareil consiste à meuler les zones kératinisées à l'aide de divers couteaux. Le maître décide quels polisseurs utiliser individuellement, en fonction des caractéristiques des pieds et des ongles. Avant le traitement, les pieds ne sont pas trempés dans l'eau. Des produits cosmétiques de pédicure professionnels leur sont appliqués.
Pédicure combinée
Une option dans laquelle deux types de pédicure sont utilisés - classique et matérielle. Une pédicure des pieds se fait à l'aide d'une machine, et les ongles et les cuticules sont rangés avec les ciseaux et limes habituels.
Pédicure avec matériel médical
Si une personne a des problèmes de pieds et souffre de cors et d'ongles incarnés, de maladies fongiques, d'hyperkératose, une pédicure régulière ne lui conviendra pas. Il a besoin de soins médicaux professionnels.
Ce traitement des pieds ne peut être réalisé que par un podologue. Il utilisera des médicaments spéciaux.
Quelle pédicure est la meilleure : matérielle ou classique ?
Pour déterminer quelle pédicure est la meilleure : matérielle ou classique, examinons leurs principales différences.
- Pour réaliser des soins classiques des pieds, il faut utiliser de l'eau, mais dans la version matérielle, seules des crèmes sont utilisées pour traiter les callosités, les cors et les crevasses. Cela accélère un peu le processus et élimine le risque d'infection.
- Le trempage des pieds dans l'eau tiède, obligatoire pour l'approche classique, est déconseillé aux personnes souffrant de thrombose.
- Mettre de l'ordre dans vos pieds à l'aide d'un équipement spécial est absolument indolore, mais une pédicure régulière peut entraîner des sensations désagréables.
- Tailler une pédicure signifie travailler avec des ciseaux à ongles et un coupe-ongles, ce qui entraîne souvent des coupures. L'infection peut pénétrer dans le corps par les blessures.
- Un appareil spécial aidera à obtenir une peau de pied plus lisse et une meilleure forme des ongles qu'un traitement manuel.
Les avantages d'une pédicure réalisée avec un appareil indiquent que dans de nombreux cas, il vaut la peine d'acheter un appareil et de prendre soin de vos pieds vous-même. Le prix de l'appareil peut être tout à fait abordable.
Comment faire une pédicure matérielle à la maison de vos propres mains, caractéristiques de mise en œuvre
Après avoir acheté un appareil de pédicure, vous pouvez commencer à soigner vos pieds. La procédure est plus confortable et indolore, mais pas rapide. Par exemple, une pédicure des pieds avec des produits cosmétiques pour adoucir la peau prendra environ une heure.
Il est préférable d'effectuer les premières procédures à une vitesse inférieure. Les buses doivent être positionnées à un angle de 35 degrés par rapport à la surface du corps. Tous les mouvements pendant le travail doivent s'effectuer du centre vers les bords, à l'opposé du sens de rotation de la fraise. Ne gardez pas l'accessoire de travail sur un seul endroit de la peau ou de l'ongle pendant une longue période.
Comment faire une pédicure matérielle
La particularité du traitement des pieds à l'aide de l'appareil est une approche intégrée. Il vous suffit de regarder les leçons vidéo (présentées dans notre article), d'apprendre à choisir les attaches adaptées aux différentes zones du pied et de suivre étape par étape les recommandations des experts.
Ce qui est nécessaire pour la procédure
- Appareil de pédicure à domicile avec un ensemble d'accessoires. Seuls deux ou trois accessoires sont vendus avec la machine, vous devrez donc acheter ceux qui manquent pour obtenir le traitement souhaité.
- Un produit pour adoucir les peaux mortes.
- Gel antiseptique.
- Lotion hydratante pour les pieds ou pommade médicinale avec l'effet souhaité.
Technique pour effectuer une pédicure matérielle
La procédure de traitement matériel des pieds peut être effectuée environ une fois toutes les deux semaines. Les hommes bénéficient d'une pédicure professionnelle une fois par mois.
Instructions étape par étape pour la pédicure matérielle.
- Appliquez le dissolvant sur vos pieds. La jambe doit être correctement préparée pour l'intervention.
- Lors de la sélection des couteaux nécessaires, meulez toutes les zones du pied dans l'ordre. Tout d'abord, les talons sont polis avec des couteaux grossiers, puis le reste du pied est traité en faisant attention aux callosités. Séparément, nettoyez la couche cornée de votre pouce. Ensuite, vous devez traiter la cuticule.
- Chaque ongle doit être mis en ordre : donné la bonne forme et poli. Les ongles des pieds n’ont pas une forme ovale afin qu’ils ne poussent pas dans la peau.
- Vous devez maintenant recouvrir vos ongles de vernis décoratif ou hygiénique.
- Et la dernière étape consiste à appliquer une crème pour les pieds hydratante ou médicamenteuse.
Pédicure des pieds
La peau du pied nécessite une attention particulière. Après ramollissement avec le produit, les pieds doivent être épongés avec une serviette. Ensuite, la peau de cette zone est poncée avec un couteau à gros grains pour éliminer les callosités et les excroissances. Le polissage doit être effectué à l’aide d’un accessoire abrasif fin. Avec un cutter similaire, vous pouvez traiter les zones situées entre les doigts et les rouleaux sur les côtés.
Règles pour choisir une machine à pédicure
Pour réaliser une pédicure matérielle appropriée à la maison, vous devez acheter un appareil présentant des caractéristiques appropriées.
- Pas besoin d'acheter un modèle encombrant. Il existe sur le marché des appareils compacts qui sont pratiques non seulement à utiliser localement, mais également à emporter en voyage.
- Faites attention au poids de la poignée. Il ne doit pas dépasser 200 grammes, sinon votre main se fatiguera rapidement.
- La forme de la poignée doit être confortable pour faciliter la procédure.
- Veuillez noter qu'il y a un aspirateur intégré. Cela aidera à se débarrasser de la sciure de bois.
- Un appareil électroménager ne doit pas avoir un cordon trop long.
- Pendant l’apprentissage, il est préférable de disposer d’un équipement doté d’une pédale pour contrôler la vitesse.
- La puissance de l'appareil de pédicure doit être d'au moins 35 watts. Les manucures peuvent être réalisées avec un modèle moins puissant, mais il sera difficile de réaliser des soins des pieds.
Quels couteaux choisir
Les fraises varient en termes de degré d'abrasivité. Les buses à gros grains sont utilisées pour broyer les tissus kératinisés. Les accessoires abrasifs fins polissent parfaitement la peau.
Les couteaux diffèrent également par leur taille.
Quels accessoires conviennent à quoi ?
Les grands accessoires sont utilisés pour les pieds et les petits pour les orteils et la zone qui les sépare.
Le matériau à partir duquel les couteaux sont fabriqués est également important :
- Les pointes de diamant sont bonnes pour les peaux rugueuses.
- Des couteaux en céramique sont utilisés pour éliminer les fissures.
- Les fraises en carbure de silicium sont excellentes pour broyer la peau fortement kératinisée.
- Des buses en silicone sont nécessaires pour polir les ongles.
Une pédicure matérielle indépendante est une excellente solution pour ceux qui ne sont pas satisfaits du coût élevé des services en salon. De plus, faire une pédicure à la maison est pratique et agréable.
La pédicure matérielle peut être faite à la maison
Si un ami vous a dit à quel point une pédicure matérielle est un miracle et à quel point vos pieds se sentent bien après, ne vous précipitez pas pour vous rendre dans un salon coûteux. Cette procédure est tout à fait possible à maîtriser soi-même.
En général, une pédicure matérielle à la maison n'est pas une chose si difficile. Vous n'avez besoin d'acheter qu'une seule fois une machine spéciale pour une pédicure matérielle et vous pouvez offrir à vos pieds un salon à la maison à tout moment.
Comment choisir la bonne machine dans un magasin ?
Pour un usage domestique, vous n’avez pas besoin d’un appareil puissant avec un aspirateur intégré (oui, les salons « cool » les utilisent aussi). Une machine simple pour la manucure et la correction des ongles vous conviendra.
De telles machines sont vendues dans n'importe quel magasin de manucure. Assurez-vous simplement que la vitesse est bonne - au moins 30 000 tr/min. Ils vous persuaderont de prendre la version « maison » avec 5 à 10 tr/min, citant l'argument selon lequel travailler à des vitesses élevées peut entraîner des blessures.
Mais le fait est qu’une manipulation imprudente des ciseaux à ongles peut également entraîner des blessures. Et, à l'inverse, si vous faites tout lentement, en ajustant la vitesse, il n'y aura aucune blessure.
Pédicure matérielle – salon de beauté à domicile
Passons maintenant à la pédicure elle-même. La beauté d'une pédicure matérielle à domicile est qu'elle se fait « à sec », les pieds ne sont pas trempés dans l'eau, comme dans la procédure classique.La seule préparation possible (et uniquement en cas de peau très rugueuse des talons) est de lubrifier les zones rugueuses avec une composition pour adoucir les callosités. Ensuite, il faut attendre un peu.
Après cela, trois types d'embouts éliminent les cellules mortes du talon, du gros orteil et partout où il y a un excès de peau rugueuse.
Quels types d’accessoires existe-t-il pour une machine de pédicure ?
Les accessoires de machine pour la pédicure matérielle sont divisés en deux grands groupes : pour le traitement de la peau et pour le traitement des ongles. Il existe trois types d'embouts pour la peau du pied, tous avec une abrasivité différente :
- Tout d'abord, les talons sont poncés avec la buse la plus grossière.
- Ensuite, un modèle « plus doux » est utilisé.
- Et, au final, le plus lisse (comme du papier de verre à grain fin)
Passons maintenant aux ongles. On repousse la cuticule avec un bâton, comme pour une manucure. Nous utilisons une lime rugueuse pour façonner les ongles (rugueuse car les ongles des pieds sont généralement plus épais).
Ensuite, prenez un embout à tête ronde et passez sur tous les ongles en soulevant la cuticule. Dans certains cas, cela suffit et les ongles sont soignés. Mais s'il y a des « bavures » qui dépassent, coupez-les avec une pince à épiler.
Avec le temps, la dextérité apparaîtra, et vous pourrez vous passer complètement des ciseaux...
La procédure est complétée par le polissage des ongles. Une buse en forme de cône est utilisée ici. Promenez-le sur toute la surface des ongles, sans oublier les coins.
Et le dernier accessoire est un accessoire de ponçage doux. Il ajoute de la brillance à l'ongle et lisse complètement les rugosités. Ça y est, vous pouvez appliquer du vernis à ongles !
Comme vous pouvez le constater, une pédicure matérielle à la maison est une chose facile à faire, si seulement vous en avez l'envie !..
Bonjour, chers invités et lecteurs !
À l'image d'une fille ou d'une femme moderne, la manucure et la pédicure font partie intégrante de son individualité. Aujourd'hui, je vais essayer de concentrer votre attention sur la pédicure matérielle, qui est manière innovante pour les soins des pieds, tant d'un point de vue médical qu'esthétique.
Il élimine facilement les cellules épithéliales mortes des pieds, résiste bien aux ongles incarnés, aux plaques unguéales hyperkératosiques, aux callosités ou aux fissures, peut traiter en douceur la zone autour de la verrue, ne touche ni ne blesse les tissus cutanés vivants.
Pourquoi un tel système de soins de la peau et des ongles ? les experts recommandent les personnes souffrant de problèmes circulatoires ou de diabète.
La technique de pédicure matérielle a récemment gagné en popularité. évincement traitement des pieds Elle est réalisée professionnellement dans les salons de manucure par des prothésistes des ongles.
Cependant, aujourd'hui, de nombreuses filles, afin de remettre de l'ordre dans leurs jambes, choisissent cette technique pratique, qui ne prend pas beaucoup de temps, et même économise de l'argent.
Par conséquent, pour les représentants du beau sexe qui décident de se faire faire une pédicure matérielle à la maison, je vais vous le dire sur les caractéristiques de cette procédure, composants des appareils de pédicure ménagers, un schéma des actions séquentielles correctes.
Sur quoi faut-il travailler ?
Pour effectuer une pédicure matérielle à la maison, vous devez au minimum acheter cet outil pour le travail. A cette occasion, je conseille aux demoiselles décider d'abord ce que vous voulez, étudiez les avis sur différents modèles, puis choisissez-en un pour vous-même appareil du segment de prix moyen, mais avec :
- Bonne puissance ;
- Légères vibrations ;
- Poids léger;
- Ergonomie confortable ;
- Fonctions universelles ;
- Garantie du fabricant.
Le corps de travail de ces appareils est constitué de diverses buses incluses dans leur ensemble complet. Selon le but, ils peuvent être :
- diamant. Ce sont de petits accessoires qui servent à traiter les bords libres de l’ongle et les cuticules rugueuses.
- Céramique pour traiter les plaques à ongles ou éliminer les fissures. Ce sont généralement les accessoires les plus sûrs recommandés par les experts pour les débutants.
- Métal. Ces fraises en carbure sont fabriquées avec une variété de dentelures sur la pointe pour éliminer les callosités piétinées ou les couches acryliques.
- Silicone, feutre ou caoutchouc, destinés aux travaux de polissage et de meulage.
- Sablonneux. Ces capuchons jetables sont des capuchons de fabrication chinoise présentant différents degrés d'abrasivité. À propos, ils sont peu coûteux, très pratiques à utiliser et, selon les critiques de certains artisans, ils ne sont même pas inférieurs aux marques européennes cool.
Buses, avec abrasivité grossière, est traditionnellement pris en début d'intervention pour éliminer les cors, les callosités ou les larges couches kératinisées de la peau. Fraises avec abrasivité fine vous permettent de polir vos pieds et vos plaques à ongles au stade de la finition. Et aussi par eux confortable travailler avec:
- Cuticules ;
- Zones entre les doigts ;
- Crêtes latérales des plaques à ongles.
Comment faut-il travailler ?
Habituellement, avant de faire elles-mêmes une pédicure matérielle, je conseille aux filles de rendre visite plusieurs fois au maître dans le salon, de ressentir tout le « goût » de cette procédure et en même temps d'obtenir d'un professionnel réponses aux questions d'intérêt.
Puis soigneusement étudier les instructionsà la machine électrique, comprenez en détail toutes ses options et accessoires. Eh bien, vous pouvez commencer à effectuer la procédure, que je vais vous expliquer étape par étape.
Préparer les pieds et les ongles
Ce premier pas lors de l'exécution d'une pédicure matérielle. Pour ça besoin de:
- Retirez le vieux vernis à ongles.
- Traitez les outils, les mains et les pieds avec une solution désinfectante.
- Coupez vos ongles à votre discrétion, à l'aide d'une tondeuse pour ajuster leur forme et leur longueur.
- Lavez-vous soigneusement les pieds puis séchez-les avec une serviette.
- Ensuite, un gel spécial aux propriétés kératiniques doit être appliqué sur les pieds pour adoucir la couche rugueuse et compactée. Généralement, selon les instructions, sa durée d'action est de 10 à 20 minutes. En même temps, il agit sélectivement sur les couches kératinisées de la peau, où il n'y a pas de terminaisons nerveuses ni de vaisseaux sanguins.
Traitement du matériel
Une fois que le gel a produit l'effet souhaité, ses restes doivent être enlevés avec une serviette et zones endommagées plus loin sont supprimés accessoires de meulage. Pour ce faire, munissez-vous d'un support en caoutchouc et d'un capuchon jetable présentant une abrasivité grossière.
Ainsi, la couche cornée principale et les petites callosités sont éliminées. Puis une analyse qualitative polissage avec des embouts abrasifs doux pour éliminer l’apparition d’un effet « frange » après l’intervention.
Après le polissage, la peau des pieds doit être saine rose ombre. Lorsque vous avez fini de traiter vos pieds, vaporisez-les d'eau tiède provenant d'un flacon pulvérisateur et essuyez-les avec un papier ou une serviette éponge.
A l'étape suivante, nous passons à traitement des doigts et les zones intermédiaires. En même temps, je ferai une réserve à l'avance sur le fait que cette zone, où se trouvent de nombreuses glandes sudoripares, est beaucoup plus sensible que le pied. Pour le traiter, vous devez utiliser un accessoire en pierre avec une abrasivité moyenne.
Et avant de travailler avec les plaques à ongles et les cuticules, vous devez les enduire adoucisseur de gel afin qu'il puisse être facilement éloigné. Ici, je voudrais noter que lors d'une pédicure matérielle la cuticule n'est pas coupée. Il est uniquement traité avec des buses sphériques recouvertes de diamant et les ongles sont polis à l'aide d'un analogue en feutre.
Nous atteignons la ligne d'arrivée
Après le traitement de base des pieds, des ongles et des espaces interdigitaux, les jambes doivent être chouchoutées avec des produits nourrissants. crèmes, protecteur huiles et tenant le poumon massage. Si vous le souhaitez, vous pouvez vernir vos ongles et les décorer de petites décorations pour vous sentir plus en confiance et ajouter un peu de charme à votre image.
Pour s'offrir une pédicure avec un appareil électrique à la maison, je conseillerais aux débutants de s'en tenir quand même à Certaines règles:
- Commencez à travailler à des vitesses minimales pour vous habituer à la machine ou éviter les blessures si vous êtes négligent.
- Positionnez la buse par rapport au plan du corps à environ 35 degrés.
- Lors du traitement du pli de l'ongle, il est conseillé de déplacer le coupe-ongles dans le sens de la croissance de l'ongle.
- La cuticule doit être traitée du centre vers le bord.
- Pour éviter que l'accessoire ne saute, déplacez-le dans le sens inverse de la rotation du cutter.
- N'appuyez pas fermement la buse contre la peau pendant que l'appareil fonctionne et ne la maintenez pas au même endroit pendant une longue période.
C'est probablement tout ce que je voulais vous dire. N'ayez pas peur de commencer, Ce n'est pas difficile. L'essentiel est qu'une fois que vous aurez compris, vous ne serez plus obsédés par le salon, puisque vous pourrez mettre de l'ordre dans vos jambes à tout moment qui vous convient.
Bonne pédicure ! À bientôt!